Sport

APEX RS

1-PC LEATHER SUIT

Best to ride

Sizes

EUR 46 / USA 13 / UK 12 / CM 30

Select color

Recommended price

799.99

€

Find dealer

The APEX RS is a one-piece sports suit that was created for adrenaline lovers. It is distinguished not only by its dynamic design but also by its high level of safety. It uses a set of certified protectors, external shoulder sliders and replaceable knee and elbow sliders. The impact zones are additionally protected by the DuoLayer Protection system (second layer of leather), the highest quality cowhide PremiumA+ leather combined with double, triple and even quadruple seams. The ventilation system is based on the use of localized perforation in strictly defined zones, thanks to which it does not reduce the strength of the suit. Demanding motorcyclists will also be satisfied with the possibility of using a chest protector, and lovers of spending many hours on the track will be equipped with a special aerodynamic hump, in which a half-liter HydroBag for drinks can be hidden (easy to clean and fill thanks to a large filling cap and detachable tube). There is a possibility to use an accessory heating or cooling vest that can be attached to this model thanks to the EvoLINK system.

Protection

PREMIUM A+ QUALITY LEATHER

The A+ quality leather means that model was crafted from high-grade, natural leather. Premium leather always ensure the best quality for your confidence.

LARGE SHOULDER AND KNEE DUAL-COMPOSITE SILDERS

The suit is equipped with external shoulder and knee dual-composite sliders, which protect the rider in case of an impact.

KNEE SLIDERS

The knee sliders are made from a high-quality, hard synthetic material.

ELBOW SLIDERS

The elbow sliders are made from a high-quality, hard synthetic material.

DUO LAYER PROTECTION™

Double-reinforced zones with second layer of high-abrasion resistant natural leather inside to provide extra protection on important parts of the jacket

DOUBLE & TRIPLE REINFORCED SAFE SEAMS

Our specially designed double and triple reinforced seams provide extra ripping protection.

EXTRA REINFORCEMENT PANELS IN STRETCH-LEATHER CONNECTION

Additional reinforcement panels as stretch-leather connection placed on forearm and knee areas provide additional tearing resistance and improving overall protection performance.

BIG AERODYNAMIC H2O HYDRO-HUMP

The hump minimizes the formation of turbulent air behind the helmet, making it indispensable at higher speeds. It is also designed to insert hydration system, holding 0,5 litres of water.

OPTIONAL: SAS - TEC CHEST PROTECTOR

The jacket gives you the option to mount a SAS -TEC chest protector for even more protection - sold separately

CERTIFICATION LEVEL: AAA

Climate:

EXTENSIVE LOCALISED PERFORATED LEATHER

Special laser-cut perforations localized in the strategic areas (even where it is difficult) for optimal airflow without compromising on protection. Extensive perforations placed on the front, legs and sleeves.

3D MESH PANELS ON THE LINING

The lining contain 3D-mesh fabric panels, which provides excellent ventilation and air circulation.

EVOLINK : LAYER CONNECTING SYSTEM

The jacket features an EvoLINK system dedicated for optional cooling or heating vest. These vests could make you riding possible and more comfortable even with unpredictable weather conditions, the intuitively-marked fasteners make removing and reapplying the whole set a breeze.

Comfort

3D ERGONOMIC CONSTRUCTION

It was designed taking into account the range of movement of the motorcyclist. Thus it does not restrict the user and does not slow down the reflex.

BREATHABLE ELASTIC INSERTS

Breathable panels are places where additional airflow can be activated safely. They are made of properly selected material with increased air permeability. In addition, the ventilation panels in this model are constructed of extremely flexible material, which increases comfort and convenience.

ELASTIC LEATHER PANELS

Specially-designed elastic leather areas guarantee freedom of movement, while the extra fabric inside the panels provide additional protection.

LEG WIDTH ADJUSTMENT

The width adjustment on the leg used in these trousers increases the level of safety, significantly affects the comfort of use and guarantees a good appearance.

Horizontal Tabs

Size chart

The proper fitting is user responsibility. The garment should fit snugly but not too tightly: no discomfort should be caused by the clothing when taking your normal riding position and you must be able to reach the controls easily.

To determine the exact size correctly, measure close to the body. The meter should not be tight. When measuring, it' s recommended to wear only lightweight, fitted clothing and stand in a loose but upright position. To make the measurement more accurate, ask for assistance another person. If the measured values are between different sizes - always choose a larger size.

size_chart_apex_rs.jpg

Instructions & Certificates

EU Declaration of Conformity:

PDF icon apex_rs_declaration_of_conformity.pdf

Wash or clean your garment following the washing instructions on the stitched label.

Remove the inner protectors before washing your garment and make sure to insert them again in the dedicated pockets after washing! Never tamper with the garment in any of its parts. When not in use, the garment must be stored in a dry and ventilated place. After use leave it dry in a well ventilated place, at room temperature.

Care Instructions for APEX RS SUIT:

• Do not wash

• Do not bleach

• No dry cleaning

• Do not iron

• No wringing

• Drip dry verticaly in shade

• Use specific products for cleaning and maintaining leather

• Do not leave exposed to direct sunlight

• Do not leave it permanently exposed to high or low temperatures

• Do not use dryer or other heating devices

To clean the protectors:

• Remove dirt with a damp cloth only; for heavier soiling use damp cloths or soft brushes with lukewarm water (max 40°C).

• Do not wash under running water

• Do not use hot water, solvents or other chemicals to clean the protector

Material

Outer shell:

72% Cowhide leather

20% Polyamid

8% Elastane

Lining:

100% Polyester

Hitting the apex

Adrenaline... When you feel it beating in your temples, and you twist the throttle, everything else stops counting. It'll be a good day. The sun, speed, the smell of burnt gasoline. You know it's gonna be hard, it's gonna be hot, and the others won't give up. Competition... The fight for the best lap can only be won by one. APEX RS is here to help you.

Protection - level expert

While you're taking the next turn, your safety will be ensured by a set of certified protectors for shoulders, elbows, knees and hips with a dedicated back protector. The suit can be additionally equipped with an optional SAS-TEC chest protector to make you feel even more secure. We've reinforced the most vulnerable areas with an extra layer of leather - DuoLayer Protection technology increases resistance to abrasions and tears.

Thirsty?

Heavy riding requires full focus. The APEX RS is equipped with a large aerodynamic hump that reduces the formation of turbulent air behind the helmet. When you feel thirsty, you can keep your hydration level up with the H2O HydroBag, which you can place in the hump of the suit. The H2O HydroBag with a capacity of 0.5 litres is sold separately.

Cold and warm game

For your comfort during the racetrack, we made localised perforations of the suit to ensure pleasant air circulation. Laser cut perforations in strategically selected areas allow your skin to breathe freely while protecting it from abrasions and impacts. And if you are competing on extremely hot or cold days, you can use the EvoLink system to quickly and intuitively insert a cooling or heating accessory vest.

Knee down

When you get down on your knee rapidly at the next corner, you will surely appreciate the work of interchangeable sliders, including the elbow ones. In addition, the large, permanently attached external sliders located on the shoulders and above the knee will increase your safety on the track.